XPG PRIME ARGB ARGB luminescent strip set of 2 ARGBSTRIP-BKCWW [Equipped with 30 addressable RGB LEDs]

[Product Infomation] Brand : Materials : [Product Description] ・Set of 2 RGB LED strips (60cm) compatible with addressable RGB emission control that can be easily attached to and detached from a PC. ・Set of 2 RGB LED strips (60cm) compatible with addressable RGB emission control that can be easily attached to and detached from a PC. -Easy to attach and detach using magnets and the included 3M tape. Easy to change layout. - Compatible with general-purpose ARGB standards from various companies such as ASUS Aura Sync . It can also be used on non-compatible PCs. ・You can also use only the 12 preset lighting modes installed in the included controller. XPG PRIME ARGB LED STRIP is a strip with 30 addressable RGB LEDs that can be easily attached and detached from your PC. Compatible with general-purpose ARGB lighting control standards such as ASUS AuraSync, allowing you to control all colors, brightness, and flickering to achieve flowing lighting. Installation and removal can be easily done using the 11 magnets installed inside the sleeve and the included 3M double-sided tape. ■Compatible with ARGB installed on many motherboards Compatible with ARGB control standards ASUS Aura Sync , ASRock RGB LED , GIGABYTEE RGB FUSION , MSI MYSTIC LIGHT SYNC . By controlling it with an app that supports the above standards, it can change colors in addition to single colors such as red and blue, creating gradations of light and dark, and organic luminescence that resembles breathing or heartbeat. ■Can also be used with motherboards without ARGB You can use this product alone even if your motherboard does not have ARGB functionality. If you supply power to the small controller from the SATA 15-pin power cable installed in this product, you can select from 12 built-in lighting patterns with a switch and emit light. 12 types are available, including brightness changes for a single color, brightness changes for multiple colors, and flowing blinking speeds. ■Easy installation The strip is equipped with 11 magnets and is easy to attach and detach, allowing you to easily try different layouts. For areas where magnets cannot be fixed, use removable 3M adhesive tape (included). In addition to wiring inside the PC case, it can also be laid out on the bottom of the PC case. ■Supports up to 4 connections The number of extensions that can be added varies depending on the environment, but it is possible to connect up to 4. When connecting, please use the included relay cable. *The maximum number of connections will vary depending on the overall power distribution of the motherboard and installed power supply. ■Product specifications RGB LED: ARGB 5050 LED(SK6812) x 30 pieces Voltage: 5V Power consumption: 9W Beam angle: 120 degrees Operating temperature: -40 ~ 85 degrees Magnet: NdFeB permanent magnet x 11 pieces Size: Length 600 x Width 10 x Thickness 2.5 mm Color rendering: 256 levels of gray scale Flex PCB: 1oz copper Lumens (brightness): Red: 400