Eonvic Aviation Plug M12 12-pin female to 3-way power signal and data transfer cable DJI Livox LiDAR Mid 360 For 70,50cm

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. It can be connected to Mid360 via Livox Aviation Plug 1/3 cable to achieve power connection, control signal transmission and data transfer. Connector A: M12 12 pin female connector Connector B: Open end (power cable) + RJ45 (Ethernet cable) + 1x open end (function cable). Cable length: 50cm (other lengths can be customized) Made of high quality materials, gold-plated trident tip, network cable tight bite, strong and durable PVC environmental protection material. Pure copper core + aluminum foil shield + braided mesh shield to prevent external signal interference. Stronger transmission, faster and more stable network speed. Connection method: 1 Connect the M12 aviation plug female connector to the M12 aviation plug male connector on Mid360. To ensure a secure connection, use a wrench to tighten the lock nut on the female connector to the end of the lock nut on the male connector, making sure there are no gaps. Connect the RJ45 connector of the cable to your PC. 3. If GPS time synchronization is required (but not required), connect the cable's function wire to a suitable synchronization source.For detailed wiring sequences, please refer to the wire sequence table in the interface definition section. 4. Connect the external power cable of the cable to the external power source, paying attention to the input voltage range and polarity.