Flux wire 2kg welding for soft iron MiG wire Tinkid Arcury MIG100 MIG130 MIG160 MIG200 lbs lbs 1kg 2 pieces roll [BG] 0.8mm

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. By purchasing directly from highly rated manufacturers from all over the world, we are able to offer products with high cost performance. We receive carefully inspected products from reliable manufacturers. Furthermore, to ensure that you can purchase with confidence, we conduct two inspections: manufacturer inspection and post-purchase inspection. In the unlikely event that there is a defect, you can proceed through the [Order History] even if the product has been opened or used. We will respond quickly from the Amazon Customer Center, which is available 365 days a year and provides safe and reliable support. Please purchase with confidence. E71T-GS flux wire, which is indispensable for welding, can be used for applications such as metal lap welding and butt welding, automotive sheet metal repair, and duct construction. Better than solid wire, E71T-GS flux wire penetrates deeper than solid wire. Suitable for high-speed, single-pass applications and generates higher temperatures than solid wire. Clean welding can be performed with minimal spatter. No excessive flux builds up in the weld. [For semi-automatic welding machines] MIG non-gas wire (flux wire) no gas required MIG100, MIG130, MIG160, MIG200 Suzukid Arcury [Product specifications] Body size: mounting part inner diameter 16mm, outer diameter 100mm, height 47mm, wire diameter: 0.8mm, weight: 2kg/4.4 pounds (2 rolls), original microfiber towel E71T-GS flux wire, which is indispensable for welding, can be used for applications such as metal lap welding and butt welding, automotive sheet metal repair, and duct construction. ●Better than solid wire, E71T-GS flux wire penetrates deeper than solid wire. Suitable for high-speed, single-pass applications and generates higher temperatures than solid wire. ●Enables clean welding with minimal spatter. No excessive flux builds up in the weld. [For semi-automatic welding machines] MIG non-gas wire (flux wire) No gas required MIG100 MIG130 MIG160 MIG200 Suzukid Arcury [Product specifications] ●Body size: Installation part inner diameter 16mm, outer diameter 100mm, height 47mm ●Wire diameter: 0.8mm ●Weight: 2kg/4.4 pounds (2 rolls)