MIG Welding Flux Pack of For Mild Flux Cored Gasless Soft Gas Shield Non-Gas Wire, 2, 2Kg, Steel, Wire, Silver, Automatic, S

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Flux-cored welding wire used for metal lap welding such as sheet metal repair and duct construction. It can be easily used for personal specifications such as DIY at home. The capacity is approximately 2Kg for 2 pieces. *Although it is for welding mild steel (carbon steel), it can also weld iron + stainless steel or thin stainless steel. Better than regular solid wire and blends deeper. Suitable for single-pass applications and high-speed running, it reaches higher temperatures than single-track lines and improves work efficiency. The flux wire flows smoothly through the gun, resulting in a clean weld with minimal spatter and no excessive flux buildup in the weld. There is no shielding gas, which reduces welding costs. *If you want to maintain the quality of stainless steel, please purchase a stainless steel welding type separately to prevent rust. [Spool size] Outer diameter 100mm, width 45mm, installation inner diameter 16mm *Please check the spool diameter in advance as there are some welding machines that cannot be installed. [Wire size] 0.8mm [Quantity] 2 rolls (2Kg) [Color] Silver A flux-cored solid welding wire used for metal lap welding such as sheet metal repair and duct construction. It can be easily used for personal specifications such as DIY at home. The capacity is approximately 2Kg for 2 pieces. *Although it is for welding mild steel (carbon steel), it can also weld iron + stainless steel or thin stainless steel. Better than regular solid wire and blends deeper. Suitable for high-speed running in single-pass applications, it reaches a higher temperature than single track, increasing work efficiency. The flux wire flows smoothly through the gun for a clean weld with minimal spatter, without excessive flux building up in the weld. There is no shielding gas, which reduces welding costs. *If you want to maintain the quality of stainless steel, please purchase a stainless steel welding type separately to prevent rust. [Spool size] Outer diameter 100mm, width 45mm, mounting inner diameter 16mm *Please check the spool diameter in advance as there are some welding machines that cannot be installed. [Color] Silver *Instruction manual is not included. *Since this product is an imported