ActiveIsland Cork Board Leather Craft Leather Tools Cork Board Rhombus Stand Stand A103 x 150 x 30 mm 1 (200 piece)

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- Cork board for leather craft. Used when drilling a hole in leather by laying a cork board underneath and piercing it from above with a rhombus. You may be wondering why this is used, but first of all, some people use diamond-cut punching to make holes for thread sewing, but there are two disadvantages. Diamond-cutting is noisy because it is struck, and the thread stitching on the back side of the leather that has been penetrated is easily disturbed. Of course there are good points as well. When using a diamond drill, the hole is marked with a diamond cut, and then the hole is drilled with a diamond cutter, but if you lay down a cork board, the tip of the drill will not get damaged. Of course, there are rubber plates etc. when drilling holes, but they are too hard and will damage the cutting edge. If you apply too much force, it will penetrate, so use it in moderation. Since it is a product exclusively for leather craft, it has a moderate hardness. The leather does not sink when stabbing. It comes out easily when you remove it. The reason why it makes a zzz sound when stabbing is because the tip of the hishigiri is rounded. Take care of yourself. Also, I think it will last longer if you don't use it in the same place. If you are considering a diamond cutter for noise countermeasures, etc., we recommend using this as a set. Size: 1 piece 200 x 150 x 30mm Weight 235g per piece 30mm thick and moderately spacious, making it easy to use. Enjoy the world of hobbies that are deep but easy to enjoy, such as making your own wallets and key cases. ActiveIsland Cork Board Leather Craft Leather Tools Cork Board Rhombus Stand Stand A103 Cork board for leather