Buy Bosch Accesorios Hss-rpointteq Din338 17.0x125x184 Mm Metal 2608577312
When you make a purchase through links on our site, we may receive a affiliate commission.
Bosch 2608577312 PointTeQ 17.00mm HSS Twist Drill Bit (Reduced Shank)
This range of Bosch HSS drill bits have a reduced shank. Suitable for drilling clearance and pilot holes in alloyed and non-a... morelloyed steel, non-ferrous metals, cast steel, cast iron and plastics. Key Features of this Bosch Reduced Shank Drill Bit: - PointTeQ tip design remains sharp and ensures continuous durability for fast drilling in metal - Increased drilling rate generates less heat and wear - Self-centering tip prevents wandering for quick and easy drilling starts - High elasticity for low risk of breakage - Black-oxide coated flute provides fast chip removal - Manufactured to DIN 338, Type N (flute angle), 135 tip
Bosch Reduced Shank HSS Blacksmiths PointTeQ Drill Bit 2608577312
Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quic... morek and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank is smaller than drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees. Cylindrical shank compatible with three-jaw drill chucks. Features and Benefits: • Fast Drilling in Metal • HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design • Self-centering tip prevents wandering, making quick and easy drilling starts possible Specifications: Diameter (D): 17,00mm Working length (L1): 125mm
Bosch Reduced Shank HSS Blacksmiths PointTeQ Drill Bit 17mm 2608577312
Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quic... morek and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank is smaller than drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees. Cylindrical shank compatible with three-jaw drill chucks. Features and Benefits: • Fast Drilling in Metal • HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design • Self-centering tip prevents wandering, making quick and easy drilling starts possible Specifications: Diameter (D): 17,00mm Working length (L1): 125mm
Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quic... morek and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank is smaller than drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees. Cylindrical shank compatible with three-jaw drill chucks. Features and Benefits: • Fast Drilling in Metal • HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design • Self-centering tip prevents wandering, making quick and easy drilling starts possible Specifications: Diameter (D): 17,00mm Working length (L1): 125mm
Bosch Accesorios Hss-rpointteq Din338 17.0x125x184 Mm Metal Drill Bit 2608577312
Bosch Hss Twist Drill Bits Pointteq:The Hss Twist Drill Bit Pointteq Enables Fast Drilling In Metal Due To Its Pointteq Tip D... moreesign. Quick And Easy Drilling Starts Are Possible As The Self-Centering Tip Prevents Wandering. Because Of Its Increased Drilling Rate, Less Heat And Wear Are Generated. The Pointteq Tip Design Remains Sharp And Ensures Continuous Durability. This Bit Is Suitable For Drilling Clearance And Pilot Holes In Alloyed And Non-Alloyed Steel, Non-Ferrous Metals, Cast Steel, Cast Iron And Plastics. It Has A Cylindrical Shank System (Shank Equal To Drill Bit Diameter) And Is Intended For Use In Drill Stands And Drill Drivers. There Is A Low Risk Of Breakage, Especially For Drill Bits Below 6 Mm In Diameter As The Bit Is Manufactured To Have A Highly Elastic Body. Its Black-Oxide Coated Flute Provides Fast Chip Removal. The Hss Twist Drill Bit Pointteq Is Manufactured To Din 338. The Drill Bit Is Type N (Flute Angle) With A Tip Of 135 Degrees.
Bosch Hss Twist Drill Bits Pointteq:The Hss Twist Drill Bit Pointteq Enables Fast Drilling In Metal Due To Its Pointteq Tip Design. Quick And Easy Drilling Starts Are Possible As The Self-Centering Tip Prevents Wandering. Because Of Its Increased Drilling Rate, Less Heat And Wear Are Generated. The Pointteq Tip Design Remains Sharp And Ensures Continuous Durability. This Bit Is Suitable For Drilling Clearance And Pilot Holes In Alloyed And Non-Alloyed Steel, Non-Ferrous Metals, Cast Steel, Cast Iron And Plastics. It Has A Cylindrical Shank System (Shank Equal To Drill Bit Diameter) And Is Intended For Use In Drill Stands And Drill Drivers. There Is A Low Risk Of Breakage, Especially For Drill Bits Below 6 Mm In Diameter As The Bit Is Manufactured To Have A Highly Elastic Body. Its Black-Oxide Coated Flute Provides Fast Chip Removal. The Hss Twist Drill Bit Pointteq Is Manufactured To Din 338. The Drill Bit Is Type N (Flute Angle) With A Tip Of 135 Degrees.
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
