INTELLINET Outdoor Vandalproof Gigabit High-Power PoE+ Injector One 30 W Port IEEE 802.3at/af Compliant IP67 Waterproof IK10

Outdoor Gigabit PoE+ Injector - 30 W for an IEEE 802.3at Powered DeviceN/AThe Intellinet Network Solutions Outdoor Vandalproof Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant wireless access point IP phone network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This injector has an output power rating up to 30 watts which is enough for many power-hungry PoE devices.N/AN/AHardened design for outdoor and industrial useN/AThis PoE+ injector is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating vast operating temperature range of -40 - 75C (-4 - 140F) and vandal-proof IK10 score make this Power over Ethernet injector able to withstand harsh conditions and industrial environments. Beyond that it has ratings for shock (IEC 60068-2-27) freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6).N/AN/AReduced wiring costsN/AThere's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the Injector through its two-pin terminal block simply connect this PoE+ Injector to the LAN switch port and use the existing Cat5/6/6a cabling to deliver DC power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.) away.N/AN/ASafe protection for your expensive network equipmentN/AThe auto-sensing technology of this high-power PoE Injector ensures that your products are protected from power problems like short circuits (short GND) current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.N/AN/AWall-mount optionN/AFor full installation flexibility indoors or outdoors you can mount the injector on the wall through its four built-in holes. The required mounting kit comes included in the package.