Nuby Rapidsterilise Baby Bottle Maker Steriliser - White, White NB30205

Sterilising your RapidCool just got a whole lot easier. Whether it’s a late-night feed or a day out with your baby, your RapidCool sidekick is ready to banish the bacteria in just one minute so you’re ready to make the next feed. The small and mighty baby bottle maker steriliser makes feeding time safe, quicker and a lot less stressful, just the press of a button and - zap - the UV light gives you rapid and safe sterilisation. Features: • Exclusively designed for use with Nuby’s RapidCool Portable Baby Bottle Maker and RapidHot Formula Preparation Machine. • Ease of Use - Just one press of the button gives rapid and safe sterilisation in just one minute! • Eliminates 99.9% of bacteria. • Rechargeable Battery Life - Up to 70 uses per full charge. • Auto shut-off after use - safe, simple and smart. • Handy for when you’re out and about – so you can always make a safe feed for your little one. • The indicator light on the RapidSterilise will flash either red or blue whilst in use or while charging. Please see the User Guide for an in depth breakdown of what each flash means. • Cleaning after use - Wipe your RapidSterilise clean with a damp cloth only and leave it open to air dry. Do not soak or submerge under water or in liquid. Do not use harsh cleaning agents • Using highly specialised LED bulbs, the UV steriliser destroys micro-organism DNA and prevents any further growth. As it uses light and not steam to sterilise, there is also no risk of burning, making it a safer alternative to traditional steam sterilisation. • UVC Wavelength: 260-280 NM • Battery Input: 5V/1A • Working Temperature: 0 to 40 degrees C • Battery Type: 700 mAh • Charging Port: USB Type - C Included in the box: • 1 x RapidSterilise Baby Bottle Maker Steriliser - White. • 1 x USB Cable • 1 x User Guide How it works: • Always clean before use. • Remove the upper and lower lids of the RapidSterilise separately, then open the lid of the "RapidCool" flask. • Insert the RapidCool lid into the lid sterilisation chamber, ensuring the edge of the lid presses against sensor 1. (see user guide) • Cover the neck of the RapidCool flask with the flask sterilisation chamber at the bottom of the RapidSterilise, so that it encloses the neck of the flask. The neck of the flask should be placed in the middle of sensor 2. • Press the button, the blue light will flash and sterilisation will start. • The steriliser will auto shut-off after 1 minute of sterilisation, you can also press the button again to shut down immediately. • When the lid or flask is removed whilst working, the corresponding sterilisation chamber will automatically shut off. By placing the lid or flask back into position it will resume sterilising of the corresponding chamber. If the lid and flask are not detected for more than 3 minutes, the steriliser will stop working Specifications: