Other for Security Axis

Axis 01001-001 security camera accessory Sensor unit

AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions, one with steel straps for poles between 50-150 mm (2-6 in) in diameter and one with steel straps for poles between 100-410 mm (4-16 in) in diameter.AXIS T91B47 is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation.When installing an Axis fixed dome or fixed bullet camera, there is no need for additional accessories like pendant kits, AXIS T91B47 fits the back side of the camera to ensure a cost efficient solution.Features:- Suitable for wide range of pole diameters- Safe and easy to install- IK10-rated vandal resistance - …

AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions, one with steel straps for poles between 50-150 mm (2-6 in) in diameter and one with steel straps for poles between 100-410 mm (4-16 in) in diameter.AXIS T91B47 is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation.When installing an Axis fixed dome or fixed bullet camera, there is no need for additional accessories like pendant kits, AXIS T91B47 fits the back side of the camera to ensure a cost efficient solution.Features:- Suitable for wide range of pole diameters- Safe and easy to install- IK10-rated vandal resistance - …

AXIS T94P01L Recessed Mount enables sleek elegant and discreet recessed ceiling installations together with AXIS M5525-E PTZ Network Camera. It is suitable for air-handling spaces in indoor installations as the back box is made of metal and has a 3/4 (M25) hole for protected cable-runs in conduits. When the camera is attached to the recessed mount it is embedded into the ceiling revealing only the camera dome and the low-profile cover ring which is easily repaintable.

AXIS T91B53 Telescopic Ceiling Mount is compatible with Axis pendant kits and camera holders with 3/4 conduit interface.

Easy to install. Easy to adjust
AXIS T91B53 Telescopic Ceiling Mount is easy to install and just as easy to adjust to the perfect length for your installation. Its telescopic design means the pipe component can be regulated between 1 meter (3.2 ft) and 1.8 meters (6 ft) at 10 cm/4 intervals right out-of-the box.

Food & grocery stores
AXIS T91B53 mount is ideal for retail and commercial environments where a fixed dome or a fixed box camera need to be installed under high ceilings. It is designed especially for environments with lighting and ventilation fixtures under …

Simplify your solution with PoE-powered illuminatorN/AN/AAXIS T90D20 PoE IR-LED Illuminator offers a quick and reliable installation with a plug-and-play twisted pair cable. Create a flexible and cost-effective system by connecting the PoE illuminator with any PoE midspans or switches from Axis.N/AN/AOptimized to match your cameras field of viewN/AN/ABased on the latest LED technology AXIS T90D20 PoE IR-LED delivers more light where it is needed. It generates longer infrared LED illumination distance minimize light wastage and prevent overexposure of foreground objects. With interchangeable lenses the angle of illumination can be optimized to match your network camera's field of view. AXIS T90D20 …

Based on the latest LED technology AXIS T90D25 W-LED delivers more light where it is needed. It generates longer white LED illumination distance minimize light wastage and prevent overexposure of foreground objects. With interchangeable lenses the angle of illumination can be optimized to match your network camera's field of view. AXIS T90D25 W-LED Illuminator comes with a pre-mounted 10 diverging lens and it includes diverging lenses of 35 60 and 80 beam angle. Moreover an optional 120 diverging lens is available.

Axis 01219-001 mounting kit Black

Axis 01242-001 security camera accessory Mount

The AXIS T94C01U 4 In 1 Ceiling Mount in white is a versatile and innovative device designed specifically for smart homes, safety, and security purposes. This ceiling mount offers multiple functionalities, making it an ideal solution for various surveillance applications.First and foremost, the AXIS T94C01U ensures the safety and security of your home or business premises. Designed to support AXIS cameras, this ceiling mount allows for the installation of IP cameras for high-quality video surveillance. It provides a stable and secure mounting location to capture clear and detailed footage, enhancing your overall security system.Additionally, the 4 In 1 feature of the AXIS T94C01U adds further …

Roomy compartment for protection and connectivity

AXIS T91G61 Wall Mount Grey is specially designed to accommodate and safely protect against water ingress inside the mount such as midspans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data.

AXIS T94J01A Wall mount grey

AXIS T94J01A Wall Mount Grey is an aluminum wall mount suitable for AXIS Q6215-LE. It is compatible with Axis ACI 3/4 conduit adapters and offers six cable entries. Cables can be routed through the back or by using a conduit connection from each side or from the bottom. Compatible with AXIS T94N01G Pole Mount Robust and impact-resistant aluminum wall mount forAXIS Q62 Series. Multiple cable entry points for 3/4 (M25) conduit pipes. Suitable for indoor and outdoor use. Color: Urban Grey.

AXIS T94V01C Dual Camera Mount is a highly versatile accessory that allows back-to-back installation of two Axis cameras for panoramic coverage. It is compatible with a wide range of Axis network cameras including dome cameras box cameras and bullet cameras. It can be easily combined with diverse Axis mounting accessories with 1.5 NPS threaded interface for mounting on walls poles and under ceilings. AXIS T94V01C Dual Camera Mount has an IK10 rating for impact resistance which safeguards it against vandalism. It is suitable for both indoor and outdoor use.

- Save time when installing multiple Axis cameras
- Drill fewer holes in walls
- Compatible with a wide range of Axis cameras and Axis …

Hp - Psg Top Config

Axis 01464-001 security camera accessory

Axis 01467-001 security camera accessory Mount

This Tamron varifocal 5 megapixel CS mount lens has a focal length of 8 – 50 mm and the fast aperture (F-number) is F1.6. The P-Iris lens is specially made for cameras with support for P-Iris technology and supports cameras with up to 5 megapixels. The lens is compatible with selected cameras from AXIS P13 Network Camera Series.- Varifocal 5 MP lens- P-Iris- 8-50 mm

A smart mount for poles of any size:- AXIS T91B57 Pole Mount is a versatile and robust, high-quality pole mount. While it can be used indoors, it's particularly appropriate for outdoor installations under harsher conditions.- The high-quality pole mount is designed for use with selected AXIS T91 wall mounts and AXIS T98A cabinet series. It is easily adjustable to fit poles with a diameter between 100–410 mm (4–16 in).A pole mount that can take it:- AXIS T91B57 Pole Mount has an IK10 rating for impact resistance, which safeguards it against vandalism. And it features a closed back and a cable gasket, which means it's also protected against insect infestation.Features:- Indoor and outdoor use-…

Axis 01471-001 strap

The outdoor-ready AXIS T91B67 Pole Mount has a 1.5" NPS threading for a wide range of Axis pendant kits for Axis fixed dome and panoramic cameras. Thanks to its impact-resistant and outdoor-proven material the mount can be used in both indoor and outdoor environments.

AXIS T91B67 is intended for poles with a diameter between 65165 mm (2 1/26 1/2 in) and also for beams. It features 3/4" conduit side entries for protected cable runs and a closed back with cable gasket for protection against insect infestation.

The pole mount is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation.

- Robust and safe pole installation …

Axis 01474-001 security camera accessory Mount

Axis 01534-001 security camera accessory IR LED unit

AXIS P33 Clear/Smoked Domes A

AXIS P33 Clear/Smoked dome A comes in packs of four domes and is sold as an accessory to AXIS P3375-V/AXISP3375-VE. The smoked dome can be used for hiding the direction of the camera.

AXIS M30-PLVE Clear Dome A

Standard clear dome with anti-scratch hard coating. Rubber gaskets included. Compatible with AXISM3057/58-PLVE. 4-piece bulk pack.