Drill Bits

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder tougher alloys. Compared to traditional HSS twist drill bits speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135° split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5µ Titanium Nitride (TiN) the TiN coating has a hardness of app. 80 HRC and …

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.6.00mm.PTDFAIJ600

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.6.50mm.PTDFAIJ650

Series L100 HSS straight shank long series drills are general purpose high speed steel long series drills are designed for deep hole drilling of most materials. Features and Benefits High speed steel construction for increased tool toughness Extra length for deep drilling applications Black oxide coating for increased heat and wear resistance Standards Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. Notes The drill has the same diameter on both the fluted section and the shank

Series J400 HSS Drill Blanks Metric Jobber length blank hardened and ground all over. Accurately ground without back taper. Diameter tolerance: h8. Manufactured to DIN 338.

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. Supplied in a plastic wallet.Ø5.5 x 100mm Straight Shank Rotary Impact Drill Bit• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. • Supplied in a plastic wallet.• Model No. SS55X100Model No: SS55X100:Brand: Worksafe:Size: Ø5.5 x 100mm:PTDSEASS55X100

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. Supplied in a plastic wallet.Ø8 x 120mm Straight Shank Rotary Impact Drill Bit• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. • Supplied in a plastic wallet.• Model No. SS8X120Model No: SS8X120:Brand: Worksafe:Size: Ø8 x 120mm:PTDSEASS8X120

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. Supplied in a plastic wallet.Ø6 x 150mm Straight Shank Rotary Impact Drill Bit• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. • Supplied in a plastic wallet.• Model No. SS6X150Model No: SS6X150:Brand: Worksafe:Size: Ø6 x 150mm:PTDSEASS6X150

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.7.00mm.PTDFAIJ700

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. Supplied in a plastic wallet.Ø6.5 x 100mm Straight Shank Rotary Impact Drill Bit• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. • Supplied in a plastic wallet.• Model No. SS65X100Model No: SS65X100:Brand: Worksafe:Size: Ø6.5 x 100mm:PTDSEASS65X100

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. Supplied in a plastic wallet.Ø7 x 150mm Straight Shank Rotary Impact Drill Bit• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. • Supplied in a plastic wallet.• Model No. SS7X150Model No: SS7X150:Brand: Worksafe:Size: Ø7 x 150mm:PTDSEASS7X150

Fully hardened high performance drill bit for use in wood and wood-like materials. Hex shank for precise and extra grip. Supplied in a plastic wallet. Ø8mm x 152mm Flat Wood Bit• Fully hardened high performance drill bit for use in wood and wood-like materials.• Hex shank for precise and extra grip.• Supplied in a plastic wallet.• Model No. FWB80Model No: FWB80:Brand: Worksafe:Size: Ø8 x 152mm:PTDSEAFWB80

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.9/32in.PTDFAIJ932

Expert Quality Long Series Hss Drill Bits Manufactured To Din 340 Iso 494 Specifications.PTDDRPDIR38924

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining. Features and Benefits High speed steel construction for increased tool durability Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent …

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.7.50mm.PTDFAIJ750

Letter Sizes Series J100 General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 8 - 20, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to ANSI B328, BS 328 and DIN 338. Number & Letter Gauge Drills Gauge drills are still in common use in the U.S. In the past, they were popular elsewhere, but now have been largely discarded in favour of metric sizes. When using a gauge rather than a standard measurement of size the user has to refer to a table of gauge sizes. For example, to drill a hole which is 10 thou (thousandth of an …

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.7/32in.PTDFAIJ732

Series J400 HSS Drill Blanks Metric Jobber length blank hardened and ground all over. Accurately ground without back taper. Diameter tolerance: h8. Manufactured to DIN 338.

Fully hardened high performance drill bit for use in wood and wood-like materials. Hex shank for precise and extra grip. Supplied in a plastic wallet. Ø10mm x 152mm Flat Wood Bit• Fully hardened high performance drill bit for use in wood and wood-like materials.• Hex shank for precise and extra grip.• Supplied in a plastic wallet.• Model No. FWB10Model No: FWB10:Brand: Worksafe:Size: Ø10 x 152mm:PTDSEAFWB10

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. Supplied in a plastic wallet.Ø6.5 x 150mm Straight Shank Rotary Impact Drill Bit• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. • Supplied in a plastic wallet.• Model No. SS65X150Model No: SS65X150:Brand: Worksafe:Size: Ø6.5 x 150mm:PTDSEASS65X150

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. Supplied in a plastic wallet.Ø5.5 x 150mm Straight Shank Rotary Impact Drill Bit• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2 chuck with percussion. • Supplied in a plastic wallet.• Model No. SS55X150Model No: SS55X150:Brand: Worksafe:Size: Ø5.5 x 150mm:PTDSEASS55X150

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder tougher alloys. Compared to traditional HSS twist drill bits speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135° split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5µ Titanium Nitride (TiN) the TiN coating has a hardness of app. 80 HRC and …

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining. Features and Benefits High speed steel construction for increased tool durability Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent …