—
LAN. The LAN (Ethernet) interface was originally designed to build wired computer networks. Cameras with such a connector, as a rule, also work as network devices. The advantage of this option over the Wi-Fi described below is a higher actual throughput, over
BNC — the ability to connect without additional equipment, directly to a standard network router used for a regular computer network. Of the disadvantages, one can note only the need to pull a wire, but this point is common to all wired connection options. In terms of other features, LAN is the most convenient, due to which it has become widespread in modern surveillance cameras.
—
Wi-Fi. Wi-Fi connection was originally a wireless analogue of the LAN described above and was used to connect to computer networks. When working in such networks, this connection is similar to LAN in the sense that it allows the camera to work through a regular router (of course, supporting Wi-Fi). At the same time, Wi-Fi is more convenient due to the absence of wires, but with an abundance of other wireless devices connected to the router, the channel throughput and image quality can significantly deteriorate. Note that recently it has also been possible to use this connection in Direct mode - for direct connection of the camera to another device, for example, connecting the camera to a smartphone (see "Design and capabilities -
...P2P"). However, this option is less common.
— BNC. Abbreviation for Bayonet Neill Concelman. A bayonet-type connector, usually used to transmit an analog video signal. Refers to professional video interfaces; special equipment is required to work with such a camera. However, cameras with this type of connector are usually in the lower price range. This is due to the limited connectivity options via BNC — it can only transmit a video signal, which limits the functionality of such cameras compared to models that work via LAN or Wi-Fi (see above).
— Aviation port. It is a round multi-pin connector designed for reliable connection of cameras. Such ports provide a stable connection even in conditions of vibration and high humidity, due to which it is used in car video surveillance systems. Power, video signal and control (for example, for PTZ cameras) can be transmitted through one aviation port, which simplifies installation and reduces the number of required cables.
— 3G / 4G. Connecting to the Internet via 3G / 4G mobile networks; as a rule, this requires installing a SIM card from a mobile operator in the camera. The speed of such networks allows, among other things, to broadcast video in fairly high resolution. So such a connection (of course, if there is coverage) is well suited not only as a backup option in case of Internet outages, but also as the main communication channel if there is no fixed Internet connection at all. A typical example of the second situation is monitoring a country house located “far from civilization”, but in an area with reliable mobile phone reception. In both cases, you can contact the camera via the Internet from anywhere on the planet.
