The general purpose of the pocket.
Note that for different types of such accessories (see above), a different division is used according to purpose. So, external pockets are divided into
portable and
stationary, and internal pockets are divided into laptop models,
PC chassis and
server solutions. For docking stations and cases, this parameter is not specified at all: the former initially assume stationary use, the latter, again, are portable by definition.
Here is a more detailed description of the options relevant for external pockets:
— Portable. Models designed for frequent moving from place to place and even for use on the go (for example, connecting to a laptop on the road). Most modern external pockets fall into this category — after all, initially external drives (which such pockets are an alternative to) are also made predominantly portable. The specific features of these accessories may vary, but they are all quite compact and designed for only one internal drive, and they receive energy from the same USB port they are connected to (see "Power").
— Stationary. External pockets designed to stay in one place all the time and do not involve frequent movement and use on the road. Such models are much less common than portable ones; most of them are rather l
...arge designs, designed to install 2 or more drives, and are often a kind of "NAS-server without networking". However, there are also models for 1 slot — they usually differ from portable counterparts in the presence of a stand that allows you to put the pocket vertically (so that it takes up less space on the table), and is powered by a power supply unit.
In turn, internal pockets for different purposes have the following specifics:
— For laptops. This type is usually designed to install 2.5" or M.2 form factor drives in the optical drive bay (CD / DVD) — due to the compact size of laptops, this is often the only possible way to install an additional drive.
— Chassis. Pockets designed for regular desktop PCs. Note that the term "chassis" traditionally refers to only one special kind of such pockets — the so-called Mobile Rack, colloquially known as "sled". The main function of such accessories is to provide the ability to quickly move drives from one case to another. To do this, the design provides for two parts: a base, which is mounted in a 5.25" slot on the case, and a removable cartridge, into which the drive is installed directly. To prevent theft or unauthorized physical access, the "sled" can be equipped with a lock that blocks the removal of the drive. Our time is used quite rarely, mainly when working with disk arrays, as well as in some other specific cases — for example, so that after the end of the working day you can take a disk with materials with you or hide it in a safe to ensure confidentiality.
Another kind of PC pockets are adapters for installing drives in non-standard seats. The classic case is the use of a 2.5" laptop drive in a 3.5" desktop case, but nowadays there is a more specific option — the use of an SSD M.2 drive as a PCI-E expansion card (for more details, see "Form factor") .
— For the server. Server systems most often have to deal with large volumes of information that require high reliability and/or speed of access. Thus, most pockets of this purpose are designed for several drives (from two to six) — this allows you to provide the necessary volumes and, if necessary, organize a RAID array of one or another level. At the same time, built-in support for RAID (see below) is not found in such devices — it is easier and more reasonable to organize it using the server itself. It is also worth noting that according to the method of installing disks, such pockets usually refer to “sleds” (see “Chassis” above) — this provides additional convenience, allowing, for example, quickly replacing a failed drive in a RAID array. Server pockets can use specialized connection interfaces like SAS, although traditional SATA is still more popular.The main material from which the body of the pocket is made.
— Plastic / rubber. This category includes models that use plastic and/or rubber in the construction of cases. The specific ratio and features of the use of these materials are different: the body can be all-plastic, have rubber lining at the ends to increase impact protection, be completely covered with rubber, etc. And in covers (see "Type"), these materials can also be supplemented with others — such as EVA, neoprene or even cloth. Anyway,
plastic / rubber cases are found exclusively in external models, including docking stations. Such pockets are somewhat inferior to metal pockets in terms of strength and reliability, but they are cheaper, and in normal everyday use, the mentioned difference is not critical.
— Steel. Cases made of
metal are most often made of steel, but there are other options (for example, aluminium alloys). In the inner pockets, only this option is found — this is due to a number of features of such accessories. As for external models in this design, they are much stronger and more reliable than plastic ones, besides, the metal case creates an additional feeling of solidity. The downside of these advantages is the higher price.
