Aftertouch
The presence of the aftertouch function in the keyboard (aftertouch). The essence of this function is to track the pressure force on the key after it is pressed. In fact, this means that in models with aftertouch, you can control the sound not only due to the force and speed of pressing the key, but also due to the change in pressure on it after pressing; this gives additional features and allows you to use various specific tricks of the game. The specific ways of changing the sound “tied” to aftertouch can be different, depending on the synthesis settings set: for example, when recording a guitar part, you can tie a small change in tone to this function and imitate string bending, when recording a saxophone, change the volume of notes, and etc.
Relatively inexpensive models use a common sensor to monitor aftertouch, which monitors the average force of pressure on all keys pressed; in more advanced ones, separate sensors are installed for each key.
Transposition
The presence of the transposition function in the keyboard — switching the sound to a different key. When transposing, the pitch of all keys is simultaneously raised or lowered by a certain number of semitones. This function is useful in all cases when a melody learned in one key needs to be played in a different key — for example, if the original melody is too high or too low for the vocalist, if the external accompaniment differs in key, if you need to switch between keys during the song, and etc. In such situations, by transposing the sound, you can play a melody in a new key using the same familiar keys without relearning it.
Keyboard split
The presence in the device of the function of splitting the keyboard.
This function, as the name suggests, allows you to divide the keyboard into two parts, each of which will have a different timbre. Thus, on one device, you can play the part of two instruments at once (for example, add the sound of a string orchestra to the violin) or accompany the part of the instrument with various effects (siren, klaxon, thunder, etc.). Some models allow you to select the position of the border between the keyboard zones.
Regulators (encoders)
The number
of encoder controlsprovided in the design of the keyboard.
Such a knob looks like a rotary knob, with which you can control various functions of the device to which the keyboard is connected — for example, turn the virtual knobs in the programme for recording and sound processing. At the same time, we note that a full-fledged encoder is capable of rotating 360 ° and turning to any angle in any direction, however, keyboards can also contain knobs with a limited rotation sector — they can also be called encoders. None of these options has a clear advantage: in some cases, an unlimited turning sector is more convenient, in others, a limited one.
MIDI in
Input for receiving MIDI signals from an external device such as an optional keyboard or other controller, sequencer, etc. For MIDI signals, see “MIDI Out”; here we note that such signals received at the
MIDI In input can be mixed with signals from the keyboard and output via MIDI Out or another interface of a similar purpose, or they can be sent unchanged to the MIDI Thru output. It is worth looking for a device with this input if you plan to build a complex from several MIDI signal sources and intend to use the keyboard as an intermediate link in such a system.
Connectable pedals
The maximum number of pedals that can be connected to the keyboard at the same time.
Pedals are used as additional controls to change various keyboard settings. The “classic of the genre” in this sense is the sustain pedal (see “Sustain”) — if the device has
one connector for pedals, then this will almost certainly be the input for just such a pedal. Keyboards are produced, where there
are 2 or more such inputs — in addition to sustain, you can connect pedals to them for other adjustments and effects (in particular, changing the volume).
