Model of the replacement head
Models of replacement heads supplied with the device.
This information is valuable for assessing the capabilities of a specific model and for sourcing additional, spare, or replacement nozzles, particularly for toothbrushes and dental centers that naturally use such devices (as indicated in "Type"). Firstly, it's advisable to replace the heads in these devices every 3-6 months, similar to regular toothbrushes. Secondly, if each user purchases their own nozzle while sharing a single handle, it's a cost-effective alternative to buying a separate brush for each individual, although it may be less convenient. Regardless, knowing the model of the interchangeable nozzle will save you time and effort when searching for compatible accessories.
Frequency of rotations / sweeps
The frequency of working movements of a toothbrush with a reciprocating-rotating or reciprocating-brushing brushing technology (see above). In modern models, this figure can be from 4 – 5 to 40K movements per minute.
The higher the speed of the toorhbrush, the faster and more efficiently it handles with its task. On the other hand, high speed and intensity of processing is not always desirable — for example, with sensitive teeth or weak gums, such a brush can create problems. Therefore, you need to choose a device according to the frequency of rotation, taking into account the characteristics of your teeth; Ideally, you should consult with your dentist first. However, modern toothbrushes may have several modes, including gentle (see "Functions").
Frequency of movements / pulsations
The frequency of sound vibrations provided by a toothbrush with a sonic operating principle. This parameter also means the maximum pulsation frequency for toothbrushes with support for pulsating cleaning technology (see above) and for irrigators with a pulsed operating mode. For dental centers (see "Type"), data on the irrigator is usually specified here, and the pulsation frequency of the toothbrush (if this parameter is relevant for it) is indicated in a separate note
High frequency of movements and
pulsations(from 40 thousand/min and higher) has a positive effect on the efficiency and quality of treatment, allowing you to quickly deal with dense plaque and even tartar. On the other hand, too intensive treatment can also be undesirable - for example, with high tooth sensitivity. All this is also relevant for irrigators - except that the operating frequencies in them are noticeably lower, such devices very rarely produce more than 2 thousand pulsations per minute. So when choosing, do not chase the maximum indicators of the frequency of movements and pulsations, but first of all it is important to take into account the individual characteristics of the user - for a full guarantee, it would not hurt to consult a dentist about this.
Full charge time
The time required to charge the battery from zero to 100% in a device with the appropriate power type (see above). This parameter can vary from 1 – 3 hours in relatively simple and low-power devices to a day in advanced models with capacious batteries. At the same time, the longer
the maximum operating time on a charge (see above), the longer, usually, the time required for charging, although there is no hard dependence here.
In general,
having fast charging capabilities improves the convenience of a device by reducing interruptions in its operation. However, there is a trade-off to consider: fast charging often means either a smaller battery capacity or a higher price due to the use of specialized technologies to speed up the charging process. When evaluating this parameter, it's essential to think about how you intend to use the device. For instance, if a toothbrush or irrigator is solely used at home by one person and comes with a charging stand, fast charging may not be a critical factor. The device remains consistently charged as it's constantly on the charger, and its battery doesn't deplete significantly during one use. The time between sessions, usually around 8 to 12 hours, is more than enough to maintain a charged battery, even for devices with slower charging. However, if you plan to use the device while traveling, where access to power outlets is sporadic, it's preferable to have minima
...l charging time to ensure you can recharge quickly during your trips.Cable length
The cable length for connecting the device to the power source is an important consideration. It's worth noting that this specification may also apply to battery-powered models (as mentioned in the "Type of power" section), where it refers to the cable for connecting the charger stand or the device itself to a power outlet.
Typically, shorter cable lengths (up to 1 m) are common for battery-powered models that don't require a direct connection to the power source for operation. Some of these models don't even include charging stands and are intended to be charged outside the bathroom. In contrast, longer cables are primarily found in devices powered by mains electricity designed for stationary use. In these devices, the power cord can be nearly 2 meters in length. This design allows for the cord to be extended outside the bathroom if needed because not all bathrooms have electrical sockets, and using extension cords in such humid environments is generally discouraged.
