Comparison RZTK Dental Pro vs Medica-Plus ProWater Station 7.0

The frequency of sound vibrations provided by a toothbrush with a sonic operating principle. This parameter also means the maximum pulsation frequency for toothbrushes with support for pulsating cleaning technology (see above) and for irrigators with a pulsed operating mode. For dental centers (see "Type"), data on the irrigator is usually specified here, and the pulsation frequency of the toothbrush (if this parameter is relevant for it) is indicated in a separate note

High frequency of movements and pulsations(from 40 thousand/min and higher) has a positive effect on the efficiency and quality of treatment, allowing you to quickly deal with dense plaque and even tartar. On the other hand, too intensive treatment can also be undesirable - for example, with high tooth sensitivity. All this is also relevant for irrigators - except that the operating frequencies in them are noticeably lower, such devices very rarely produce more than 2 thousand pulsations per minute. So when choosing, do not chase the maximum indicators of the frequency of movements and pulsations, but first of all it is important to take into account the individual characteristics of the user - for a full guarantee, it would not hurt to consult a dentist about this.

The pressure of the water supplied by the irrigator (see "Type") to the operating nozzle. Usually, this pressure can be adjusted within a certain range, since different situations and purposes require different processing intensity. The wider this range, the more versatile the device.

The lower limit of the pressure range in modern irrigators is around 30 kPa; similar values are set for procedures for sensitive teeth, for certain gum diseases and in other cases where the most gentle treatment is required. 400 – 500 kPa is considered an average level, and 600 – 650 kPa is considered high, such indicators allow for deep cleaning (see "Functions"). And higher values are rare, and they are used mainly when cleaning the tongue. However, it is best to consult with a dentist before purchasing an irrigator and choose a model for working pressure based on the recommendations received.

The presence of its own display in the design of the device.

These displays are typically small due to the compact size of the toothbrush or irrigator body. They usually offer basic functionality, capable of displaying one color and a limited set of characters. However, even with such constraints, they can convey various operational information, such as the selected mode, timer countdown, battery status, error messages, and more. As a result, these displays enhance overall convenience and visibility when using the device.

On the other hand, it's important to acknowledge that there's a growing number of models without displays, especially in the mid to high-end range. This shift is primarily driven by the widespread adoption of smartphone synchronization (as mentioned earlier), which offers several advantages over built-in screens. Firstly, the Bluetooth module required for synchronization is smaller and more cost-effective than a dedicated display. Secondly, smartphone screens and other control gadgets tend to be larger, more versatile, and easier to read compared to the small screens on toothbrush or irrigator handles. Additionally, the display on the device's handle is not visible during use, whereas a smartphone can be positioned in front of your eyes. As a result, it's worthwhile to seek out a model with this function if the ability to access data from a display is a crucial factor for you, regardless of whether you...have a smartphone or another additional device at hand.

This refers to the maximum duration a device can run continuously when powered by a fully charged battery or fresh batteries. It's worth noting that this metric may also apply to models designed for mains power, such as flossing systems that include rechargeable toothbrushes, in which case we're referring to the battery life of these toothbrushes.

It's important to note that device specifications typically indicate the maximum runtime under ideal conditions, often in the most energy-efficient mode of operation (and for models with replaceable batteries, using high-quality batteries). The actual battery life can vary depending on specific usage conditions. However, this parameter still serves as a valuable basis for comparing different models. Generally, differences in the claimed operating time correspond proportionally to the real differences in battery life. For example, if one toothbrush has a stated operating time of 20 minutes and another boasts 40 minutes, in practice, their battery life (under similar conditions) will likely differ by approximately two times.

It's important to consider that, for toothbrushes, this parameter can help estimate the number of brushing sessions you can expect on a single charge. Typically, the recommended daily brushing duration is 2 minutes. So, if a toothbrush has an operating time of 30 minutes, it's sufficient for approximately 15 cleaning sessions (or more realistically, around 14 or 13).

The time required to charge the battery from zero to 100% in a device with the appropriate power type (see above). This parameter can vary from 1 – 3 hours in relatively simple and low-power devices to a day in advanced models with capacious batteries. At the same time, the longer the maximum operating time on a charge (see above), the longer, usually, the time required for charging, although there is no hard dependence here.

In general, having fast charging capabilities improves the convenience of a device by reducing interruptions in its operation. However, there is a trade-off to consider: fast charging often means either a smaller battery capacity or a higher price due to the use of specialized technologies to speed up the charging process. When evaluating this parameter, it's essential to think about how you intend to use the device. For instance, if a toothbrush or irrigator is solely used at home by one person and comes with a charging stand, fast charging may not be a critical factor. The device remains consistently charged as it's constantly on the charger, and its battery doesn't deplete significantly during one use. The time between sessions, usually around 8 to 12 hours, is more than enough to maintain a charged battery, even for devices with slower charging. However, if you plan to use the device while traveling, where access to power outlets is sporadic, it's preferable to have minima...l charging time to ensure you can recharge quickly during your trips.

An indicator showing the battery charge level.

This function is predominantly found in battery-powered devices (as mentioned in the "Type of power" section). Implementing a charge indicator with replaceable batteries is challenging but occasionally seen. The specifics of this feature and how it operates can vary. The simplest form of a charge indicator is composed of LEDs. For instance, a green light might indicate a normal charge level, yellow signals a low charge, red signifies the need for charging, and blinking typically indicates that charging is in progress. More advanced indicators exist as well, such as those with their own displays that can show the specific charge level using a battery icon or even as a percentage. Regardless of the design, this feature simplifies monitoring battery status and reduces the risk of finding yourself with a dead battery at an inconvenient time.

The cable length for connecting the device to the power source is an important consideration. It's worth noting that this specification may also apply to battery-powered models (as mentioned in the "Type of power" section), where it refers to the cable for connecting the charger stand or the device itself to a power outlet.

Typically, shorter cable lengths (up to 1 m) are common for battery-powered models that don't require a direct connection to the power source for operation. Some of these models don't even include charging stands and are intended to be charged outside the bathroom. In contrast, longer cables are primarily found in devices powered by mains electricity designed for stationary use. In these devices, the power cord can be nearly 2 meters in length. This design allows for the cord to be extended outside the bathroom if needed because not all bathrooms have electrical sockets, and using extension cords in such humid environments is generally discouraged.

General dimensions of the device. Most manufacturers report this data only for stationary devices — irrigators of the appropriate variety and dental centers (see "Type") — because it is believed that toothbrushes (even with stands) are not so large as to be inconvenient, and not so varied in size, to pay attention to this difference.

Note that the dimensions are usually given only for the main unit, without taking into account the tools installed on it; however, the size of these instruments, again, it is not large enough to cause serious inconvenience.