Comparison Asus Vivobook 16 M1605YA [M1605YA-MB541] vs Asus Vivobook 17X M3704YA [M3704YA-AU129]

Diagonal size of laptop display.

The larger the screen, the more convenient the laptop for watching high-definition movies, modern games, working with large-format graphic materials, etc. Large screens are especially important for multimedia and gaming models. On the other hand, the diagonal of the display directly affects the size and cost of the entire device. So if portability is key, it makes sense to pay attention to relatively small solutions; especially since most modern laptops have video outputs like HDMI or DisplayPort and allow connection of large-format external monitors.

In light of all this, the actual maximum for laptops these days is 17"(17.3"); however larger devices (18") reappeared at the beginning of 2023. The standard option for general purpose laptops is 15"(15.6"), less often 16", a diagonal of 13"(13.3") or 14" is considered small by the standards of such And smaller screens can be found mainly in specific compact varieties of laptops — ultrabooks, 2 in 1, transformers, netbooks; among such devices there are solutions for 12 ", 11" and even 10" or less.

The resolution of the screen installed in the laptop — that is, the size of the screen in pixels horizontally and vertically.

Higher resolution, on the one hand, gives a sharper, more detailed image; on the other hand, it increases the cost of the laptop. The latter is connected not only with the cost of the displays themselves, but also with the fact that in order to work effectively at high resolutions, you need the appropriate filling (primarily a graphics card). This is especially true in games; so if you are looking for a laptop with a high-resolution screen that can effectively "run" modern games — you should pay attention not only to the characteristics of the display, but also to other data (the type and parameters of the graphics card, test results, the ability to work with certain games — see everything below). On the other hand, if the device is planned to be used for simple tasks such as working with documents, surfing the Internet and watching videos, you can not pay much attention to the “hardware” parameters: anyway, they are selected so that the laptop is guaranteed to be able to cope with such tasks on full resolution of the "native" screen.

As for specific numbers, the resolution options that are relevant today can be divided into 3 groups: Full HD (1080), Quad HD and UltraHD 4K. Here is a more detailed description of them:

...— Full HD (1080). Initially, the Full HD standard provides a frame size of 1920x1080, and it is this resolution that is most often used in laptop screens from this category. However, in addition to this, other resolution options are also included in this format, where the vertical size is at least 1080 pixels, but does not reach 1440 pixels. Examples include 1920x1200 and 2560x1080. In general, Full HD displays provide a good balance between cost, image quality and laptop hardware requirements. Because of this, nowadays they are extremely widespread; matrices of this standard can be found even in low-cost devices, although they are mainly used in more advanced technology.

— Quad HD. A transitional option between the popular Full HD 1080 (see above) and the high-end and expensive UltraHD 4K. The vertical size of such screens starts from 1440 pixels and can reach 2000 pixels. Note that QuadHD resolutions are especially popular in Apple laptops; most often, such devices have 2560x1600 screens, although there are other options.

— Ultra HD 4K. The most advanced standard used in modern laptops. The vertical size of such screens is at least 2160 dots (up to 2400 in some configurations); the classic resolution of a modern UltraHD matrix is 3840x2160, but there are other values. Anyway, a 4K display allows for high image quality, however, it costs accordingly — including due to the corresponding requirements for a graphics adapter; in addition, to work with high resolutions, it can be more convenient to connect an external monitor to the laptop. Thus, such screens are used relatively rarely, and mainly among premium laptops.

The maximum brightness that a laptop screen can provide.

The brighter the ambient light, the brighter the laptop screen should be, otherwise the image on it may be difficult to read. And vice versa: in dim ambient light, high brightness is unnecessary — it greatly burdens the eyes (however, in this case, modern laptops provide brightness control). Thus, the higher this indicator, the more versatile the screen is, the wider the range of conditions in which it can be effectively used. The downside of these benefits is an increase in price and energy consumption.

As for specific values, many modern laptops have a brightness of 250 – 300 nt and even lower. This is quite enough for working under artificial lighting of medium intensity, but in bright natural light, visibility may already be a problem. For use in sunny weather (especially outdoors), it is desirable to have a brightness margin of at least 300 – 350 nt. And in the most advanced models, this parameter can be 350 – 400 nt and even more.

The connection interface used by the M.2 SSD installed in the laptop (see "Drive type").

One of the features of the M.2 connector and drives for it is that they can use two different connection interfaces: PCI-E (in one form or another) or SATA. We emphasize that this paragraph indicates the data of the SSD module; the connector itself may provide other interface options, including more advanced ones — see "M.2 connector interface" (for example, a drive with a PCI-E 3.0 2x connection can be placed in a connector that also supports the faster PCI-E 4.0 4x). However, anyway, the connection connector usually allows you to realize all the features of the installed drive; so this item allows you to quite reliably evaluate the capabilities of the standard M.2 module.

As for specific interfaces, nowadays you can mainly find the following options:

— SATA 3. The SATA interface was originally designed for traditional hard drives. The third version of this interface is the latest; it provides data transfer rates up to 600 Mbps. This is significantly less than PCI-E, and in general, very little by the standards of SSD drives. Therefore, M.2 connection using SATA is typical mainly for low-cost entry-level modules. However, even these media are generally faster than most HDDs.

— PCI-E. Universal interface for connecting internal peripherals. Provides generally faster speeds than SATA, making it better suited for SSD modules: theoretically, PC...I-E allows you to realize the full potential of SSDs, even the fastest. In fact, the supported data transfer rate may be different — depending on the version of the interface and the number of lines (data transmission channels). Here are the options most relevant for modern laptops:

• PCI-E 3.0 2x. Connection using 2 lanes PCI-E version 3.0. This version provides speeds of about 1 GB/s per line; respectively, two lines give a maximum of just under 2 GB / s.
• PCI-E 3.0 4x. Connection using 4 lanes PCI-E version 3.0. Provides a maximum speed of about 4 GB / s.
• PCI-E 4.0 4x. Connection using 4 lanes PCI-E version 4.0. In this version, the throughput, compared to PCI-E 3.0, has been doubled — thus, 4 lines give a maximum speed of about 8 MB / s.

Note that in the case of M.2 connectors, different PCI-E variations are usually quite compatible with each other — except that the connection speed when working with a "non-native" connector will be limited by the capabilities of the slowest component. For example, when connecting a PCI-E 3.0 4x SSD module to a PCI-E 3.0 2x slot, this speed will correspond to the capabilities of the connector, and when connected to PCI-E 4.0 4x, to the capabilities of the drive.

The interface of the main M.2 connector provided in the laptop.

In this case, the main slot is considered to be the one in which the SSD M.2 drive is installed (see "Drive type"). The interface of the drive itself is indicated separately (see above), and the interface of the connector is specified if the connector supports a more advanced type of connection than the device installed in it. An example is the following situation: the device itself works according to the SATA or PCI-E 3.0 2x standard (see "M.2 drive interface" above), and the connector on the board is capable of working with the PCI-E 3.0 4x interface.

Such information will be useful, first of all, for evaluating the possibilities for upgrading a laptop (with replacing a standard SSD module with a faster one). Nowadays, in this paragraph, you can mainly find the following options:

— PCI-E 3.0 2x. In fact, the most modest PCI-E standard found in M.2 ports of modern laptops: connection using 2 lanes of PCI-E version 3.0. This version provides speeds of about 1 GB/s per line; respectively, two lines give a maximum of just under 2 GB / s.

— PCI-E 3.0 4x. Connection using 4 lanes PCI-E version 3.0. Provides a maximum speed of about 4 GB / s.

— PCI-E 4.0 4x. Connection using 4 lanes PCI-E version 4.0. In this version, the bandwidth, compared to PCI-E 3.0, has been doubled — thus, 4 lines give a maximum speed of about 8 GB / s.

— PCI-E. Connection...via PCI-E, for which the manufacturer did not specify the details (version and number of lines).

Recall that in the case of M.2 connectors, different PCI-E options are quite compatible with each other — except that the speed will be limited by the capabilities of a slower component. In fact, this means that, for example, in an M.2 connector with a PCI-E 3.0 4x interface, it is quite possible to connect a drive for PCI-E 3.0 2x or PCI-E 4.0 4x; in the first case, the speed will be limited by the capabilities of the drive, in the second, by the capabilities of the connector.

This paragraph may specify the availability of special digital and physical security features: fingerprint or face scanners, Smart Card reader and kensington/noble lock. Here is a detailed description of these features:

— Fingerprint scanner. Fingerprint recognition device. Almost the only way to use this function is to authenticate the user — during the initial boot or unlocking of the laptop, when logging into an account, when confirming payments, etc. This authorization method is convenient because the fingerprint is always at the user's disposal, his it is impossible to forget, lose or accidentally "surrender" to an attacker, like a normal password; and forgery of a print, although possible, is very difficult. Also note that some laptops with this feature allow you to memorize several users and automatically recognize them “by touch”.

— Face scanner (FaceID). A specialized scanner for facial recognition. Note that this is not just about “recognition by photography” (any webcam is capable of this — with the appropriate software), but about full-fledged three-dimensional scanning using a special IR sensor. This allows you to achieve very accurate and reliable recognition — face scanners often surpass fingerprint sensors in these indicators. And thanks to advanced algorithms, accuracy is maintained even when facial hai...r changes, putting on and taking off glasses, and other such changes. The weak point of this function is the recognition of twins, as well as children under 13 – 14 years old, who have not yet had time to form enough individual traits. As for the application, the main purpose of FaceID is to authorize the user when logging in and various accounts, making payments, etc. Separately, we note that support for this authorization method is built into Windows Hello, a biometric recognition system built into Windows 10. However, the data from the scanner can also be used for other purposes, sometimes quite original — for example, to animate a three-dimensional muzzle on the screen, copying the user's facial expressions.

— Kensington / Noble lock. The presence of a slot on the laptop case for a special security lock. Such a lock is usually used to fasten a strong metal cable, the other end attached to a fixed or heavy object. Thanks to this, theft "on a jerk" and other similar attempts to steal a laptop become almost impossible. This feature is especially useful if the device is in the public domain, such as on a display stand in an electronics store. Note that Kensington and Noble are two different types of security locks and are not mutually compatible. And the socket on the body can be designed for either one of these standards, or both at once; this point should be clarified separately.

— Smart card slot. A device for reading contact smart cards — plastic cards with built-in microchips. It is convenient to use such cards as user identifiers and/or access keys to protect confidential information. Note that an NFC (see above) can become an alternative to this function — it also allows you to read smart cards, only contactless ones. However, contact readers are somewhat cheaper, and they are also considered more reliable and secure. So such equipment does not lose popularity among business and professional laptops; and some models are equipped with both an NFC and a slot for smart cards.

The capacity of the complete laptop battery in watt-hours.

Higher capacity allows the laptop to work longer on a charge, all other things being equal. However, keep in mind that the actual battery life will depend not only on the characteristics of the battery, but also on the power consumption of the laptop itself — and it is determined by both hardware characteristics and installed software. Therefore, only models with similar characteristics can be compared with each other according to this indicator. And if you need a “long-playing” laptop, you should choose it not by battery capacity, but by directly stated operating time.

As for watt hours, this is a less popular unit of capacity than milliamp hours, but more physically correct: it accurately describes the amount of energy stored by a battery. Thanks to this, in terms of capacity in Wh, it is possible to compare batteries with different nominal voltages (whereas this is not allowed for mAh — additional calculations must be carried out using special formulas). At the same time, Wh can be easily converted to mAh if the battery voltage is known: for this, the capacity in Wh must be divided by the voltage and multiplied by 1000.

The presence in the laptop of at least one USB-C connector with support for Power Delivery technology.

Recall that USB-C can be used to connect USB 3.2 (gen1 or gen2), USB4 and Thunderbolt (v3 and v4). See above for details on all of these interfaces. And support for Power Delivery at least means that such a connector is capable of delivering increased power to the connected device — up to 100 watts. Thanks to this, even rather high consumption peripherals can work without a separate power source. In addition, if a gadget that supports Power Delivery (or fast charging technology compatible with it) is being charged from USB-C, the charging process is significantly accelerated. At the same time, one of the features of this technology is that it allows the laptop to coordinate the output power with the connected device — so that it is sufficient and at the same time does not cause overloads.

Also note that USB-C in some models is used to charge the battery in the laptop itself. In such cases, Power Delivery helps to reduce the time of such a charge — of course, with a compatible charger. However, the availability of such a possibility should be clarified separately.

The maximum power of the power supply in watts from which the laptop is supplied with power. Note that in this case the maximum power level is indicated, and this is achieved only when performing the most energy-intensive tasks, such as playing games, video rendering, etc. The rest of the time the power supply consumes an order of magnitude less power. This parameter may be useful when calculating the load when connecting a laptop computer to an uninterruptible power supply (UPS) or other means of autonomous power supply. When choosing a power supply yourself, you need to purchase it with parameters similar to the original unit or with a small power reserve on the larger side.