Comparison Holosun HE510C-GR vs Holosun HS510C

— Dust-, water protection. Protected housing that prevents dust and moisture from entering the delicate components of the sight. This feature is highly desirable if the sight is planned to be used in adverse conditions — for example, during a long hunting trip, where there is a chance of encountering bad weather. However it is worth considering that the specific degree of protection may be different, it should be clarified according to the documentation for the sight. However, almost all “protected” models are able to endure rain at least without problems.

— Impact protection. Special protection that prevents damage to the sight during impacts and shocks — for example, by accidental falling or contact with a foreign object. The effectiveness of this protection may vary for different models, but in most cases it at least allows you to transfer the fall onto a hard surface from a height of 1 – 1.5 m. with a high probability it will turn out to be useless — the impact force will be much greater than that for which the device was originally designed. In addition, after any strong impact, the sight will have to be re-aligned. However, additional protection anyway improves the overall strength and reliability of the device.

— Filling with gas. A feature that is found exclusively in sights with closed cases (see "Design"). Such cases are made airtight, and th...e internal space in them is filled with an inert gas — for example, nitrogen — with a minimum content of water vapor. Thanks to this, the optical elements of the sight do not fog up from the inside, and metal parts do not oxidize due to contact with moisture. In addition, such an air-tight housing, by definition, is also dust and moisture resistant (see above).

— Rangefinder. A device that allows you to measure distances to objects visible in the scope. Do not confuse this function with rangefinder markings and other similar reticles (see “Reticle type”): in this case we are talking about a separate device, usually in the form of a laser rangefinder. Such equipment greatly simplifies measurements: there is no need to bother with special calculations for the angular dimensions of visible objects, just one click of a button is enough, and the accuracy of laser devices is very high — on the order of several centimeters at distances of hundreds of metres. The main disadvantage of this feature is the high cost; in addition, additional equipment increases the weight and dimensions of the sight. Therefore, built-in rangefinders are found exclusively in professional models designed for high-precision shooting.

— Level. A device that allows you to control the deviation of the sight (and, accordingly, the weapon) from the horizontal position — namely, the tilt to the right / left. Such a need arises primarily with high-precision shooting: even a slight slope, imperceptible to a person, can give a significant deviation, especially at a great distance. Levels may have a different design and principle of operation, but they are always set so that the shooter can see such an indicator at the same time as aiming. For example, in optics (see "Type"), a bubble bulb is placed above the lens or to the side of it, while in "night lights" and thermal imagers, data from an electronic sensor is projected directly into the eyepiece.

— Lantern. A flashlight mounted directly into the body or on the body of the sight. A rather specific function that is rare: at distances where optics are mainly used, a searchlight is needed, for "night lights" an IR illuminator is relevant (see below), collimators are more convenient to use with a separate underbarrel or hand "tactical" flashlight. However, the built-in lamp cannot be called completely useless. So, in optical sights, it is usually combined with a laser designator (see below), allowing you to effectively use the laser in low light conditions. And in the case of a collimator, the LEDs built into the frame are more compact than a separate underbarrel flashlight (which, moreover, can not be installed on every weapon that is compatible with a collimator).

— Laser designator(LTC). Device for quick aiming at short distances. The idea of such a device is extremely simple: a laser beam shows where the weapon is aimed, creating a clearly visible mark at the point of impact. This allows you to shoot accurately, even without looking into the main sight — including "from the hip" and from other emergency positions, which is especially useful in situations requiring maximum reaction speed. LCC is relevant only at minimum distances, but this is not a drawback, but a feature that can turn out to be a definite advantage. For example, a "laser" can be a great addition to a telescopic sight, which by itself is useless at short distances.

— Compatibility with night vision devices. Possibility of using the sight with separate night vision devices. Most often, this feature is found in collimator sights (see "Type") — it means that the brightness and colour of the collimator mark make it possible to clearly see it even through night vision devices. But optical models with such compatibility are extremely rare: firstly, it is technically difficult to implement, and secondly, for sniper shooting in the dark, there are specialized night and thermal imaging sights that are more convenient and effective than a combination of night vision devices with classic optics.

The design of the drum (drums) for entering corrections, provided in the sight.

— Closed. Drums closed with threaded caps or other protective devices. This design does not allow you to quickly, on the go, make adjustments, but the regulators are maximally protected from foreign objects, and the likelihood of knocking down the settings in case of accidental contact with such an object is reduced to almost zero. This makes closed turrets perfect for scopes that are adjusted once, at initial zeroing, and then used at fixed settings; collimators and hunting optics for relatively short distances (up to 300 m) can be cited as an example.

— Open. Drums that do not have special protection — thus, you can turn such a drum immediately, only by stretching out your hand to it. Such regulators allow you to make adjustments “on the fly”, literally after each shot, making them very convenient for high-precision shooting, especially under constantly changing conditions; in particular, it is the open design that professional snipers use. As for the shortcomings, one can come across allegations that in case of accidental contact with a foreign object, the drum may turn, knocking down the settings. However, in modern sights, manufacturers take this possibility into account and prevent such cases — for example, due to a tight rotation mechanism or special drum fixation systems.

The weapon class that this scope can be used with.

Different classes of weapons differ in the energy of the shot and, accordingly, the recoil force that the sight must endure without consequences. It is the maximum allowable energy of the shot (muzzle energy) that in this case is the main criterion for classifying the sight into one of the categories: light pneumatics, rifles and shotguns, large caliber. It is worth saying that such a division is somewhat arbitrary — see details in separate paragraphs; here is their detailed description:

— Lightweight pneumatics. Sights designed for weapons that practically do not give recoil — such as air PCP rifles, spring-piston “breaks” with muzzle energy up to 7.5 J, carbines chambered for Flaubert, as well as airsoft drives. Such models are definitely not suitable for firearms: they do not tolerate even the recoil from small-caliber rifles, not to mention more serious use. And even pneumatics have their limitations — in particular, powerful (more than 7.5 J) spring-piston models give significant returns with strong vibrations, and in pistols with the Blow-back system, noticeable concussions occur not because of the shot itself, but from -for the work of automation. So it is better to equip these types of weapons with more durable and reliable sights.

— Rifles and shotguns. Sights that can be used with...rifles of small and medium calibers, as well as smoothbore weapons (shotguns). They have a solid construction that allows them to endure rather strong recoil and accompanying vibrations without consequences, but the specific restriction on the allowable muzzle energy (and, accordingly, the calibers and ammunition used) may be different. However, scopes in this category are usually able to safely carry at least 2500 J — this is enough for rifled calibers 5.45x39, 7.62x39 and .223, as well as for 12-gauge rifle cartridges with a standard weight of gunpowder. And in many models, the maximum allowable energy can reach 3500 J and even 4000 J (the smallest values \u200b\u200bnecessary for full-fledged use with .308 and 7.62x54R calibers, respectively). At the same time, for reinforced magnum ammunition, as well as for some powerful (though not large) calibers, such a sight may still not be enough.

— Large-caliber. The most durable and reliable sights, designed for muzzle energy of 4000 J and above. Because of this, they can be used even with large-caliber firearms, as well as with some powerful calibers that are not formally large — for example, .300 Win and .338 Lapua Magnum. The specific restriction on muzzle energy, again, may be different, but if you are looking for a sight for a caliber more powerful than 7.62x54R or for reinforced rifle ammunition like 12x76, you should definitely pay attention to this category.

Separately, it is worth noting that “firearm” sights, even quite durable and reliable, are not recommended to be installed on pneumatics with a spring-piston mechanism or a gas spring. The fact is that such rifles have a specific recoil, directed forward rather than backward, moreover, giving sharp vibrations in different directions; and although the force of such recoil is low, it can still adversely affect the sight, which was not originally designed for it.

The material from which the body of the scope is made.

The most popular option today is metal — it is he who is used in the vast majority of sights of all types and price categories. The composition of the metal can be different, but anyway, such cases turn out to be quite strong and reliable — even a strong blow damages the “hardware” of the sight rather than the body. The differences between different types of metals and alloys are mainly in price and weight, but in the first case, these differences are not fundamental compared to the cost of the sights themselves, in the second — against the background of the weight of the weapon.

Also on the market you can find individual models with plastic cases. The advantages of this material are its low cost and light weight, however, in terms of reliability, it is noticeably inferior to metal — including due to the fact that the body can bend from impact or pressure and the “hardware” inside will move, which will disrupt the operation of the entire device. Therefore, very few plastic sights are produced, and basically these are the most affordable collimators, designed exclusively for light pneumatics (see "Weapon Compatibility").

The range of ambient air temperatures within which the scope maintains normal performance. Note that going beyond this range does not always mean failure and failure; however, correct operation and proper accuracy in such cases are not unambiguously guaranteed.

As for specific figures, most modern scopes have a temperature range wide enough to normally tolerate not only indoor use (for example, in a shooting range), but also outdoor use in a temperate climate during the warm season — from mid-spring to mid-spring. autumn. But the possibilities of application in more extreme conditions — both in frost and in extreme heat at a level of +40 °C and above — should be specified separately.

We also emphasize that even the most “heat-resistant” models cannot be exposed to prolonged exposure to the sun: under direct sunlight, the body of the device can become very hot even in very cold weather.

The total length of the sight.

This parameter is important primarily for optical sights (see "Type"). Such devices can be quite large — from 20 – 30 cm in the most compact models up to 40 cm or more ; and the distance from the eyepiece to the eye when aiming must be strictly defined. So before buying, it's ok to clarify whether it will be possible to correctly place the selected model on the weapon. But collimators, even the largest ones, are very compact, usually there are no problems with their installation, so in such models the length does not play a special role.