Cable length
The length of the cable provided in the design or delivery set of the wired or combined controller (see "Connection").
In general, the meaning of this parameter is obvious: a longer cable gives more freedom of movement, but can create inconvenience at short distances. In fact, the length of the wire is important mainly in cases where a wired connection is used to play on a large screen: for comfortable viewing, it is desirable to be at a fairly large distance from such a screen. However, even in this case, a relatively short cable can be compensated for by the length of the wires going from the console (or other gaming device) to the screen, or even by connecting the set-top box to the screen wirelessly (many modern models have this capability). If the controller is used for a computer, this parameter can be ignored: the system unit or laptop is usually located in close proximity to the user, and even a fairly short wire is enough to connect.
Sticks
The number and location of
analogue sticks provided in the design of the manipulator.
The analogue lever can be described as a "miniature joystick" — it is a protruding lever that can be deflected in any direction. Its purpose is generally similar to the D-Pad (see above), but the stick does not have fixed positions; this provides more "fine" control, which is very important in modern games. In addition, tilting it is often more convenient than pressing the D-Pad.
Separately, it is worth mentioning
sticks on Hall sensors. The design of such levers is more reliable due to the absence of rubbing and contacting parts, and the position of the stick is determined by changes in the fluctuations of the magnetic field, which are monitored by appropriate sensors. Sticks on Hall sensors do not have “dead zones”, are devoid of the drift effect (misalignment), and wear out an order of magnitude slower. However, such solutions are not cheap.
This feature is most widely used in gamepads (see "Device type") — most of these controllers have at least one lever,
models without sticks are already considered rare. In addition, such equipment, by definition, is installed in all arcade controllers; and analogue levers are also found in virtual reality weapons and motion controllers — it is very convenient to control the movement of the character through them.
...r>
As for the location, it is indicated mainly for traditional design gamepads with a full set of controls, including 2 sticks. The most common options here are the left lever on top, the right one on the bottom ( like Xbox) or both levers on the bottom (like PlayStation). Much less common are devices where both analogue sticks are installed on top — this is, in particular, a regular gamepad for Wii U, as well as many models for mobile gadgets. And in some manipulators, a customizable (adjustable) arrangement of levers is provided: usually, the right stick in such models is fixed, and the left one can be installed from above or below, changing the format of the gamepad to suit your preferences.Triggers
Auxiliary controls located on the top of the gamepad on the back of the case. Triggers are pressed using the player's index or middle finger.
Classic gamepads and joysticks
have triggers. used to control various actions in games (for example, accelerating a car in racing, shooting in shooters, etc.). Moreover, in some models it is possible to press the trigger halfway for conditional aiming in the game or fully to fire at opponents. Also, such buttons can have a feedback function via vibration. The vast majority of triggers are based on potentiometers (variable resistors), less often on Hall sensors, which monitor changes in magnetic field fluctuations and do not have rubbing parts in their design (but are also more expensive).
Triggers are arranged somewhat differently in overhead gamepads for smartphones (see “Type”). Often, such controls are equipped with trigger-type mechanisms and moving contacts that are sensitive to the touch layer of the screen, which touch a certain area of the display when the triggers are pressed. Depending on the layout in the game, different control functions are supposed to be assigned to the triggers (shooting, aiming, squatting or jumping, etc.).
Rear buttons
Additional buttons located on the rear panel of the game controller housing.
Such equipment is found exclusively among gamepads (see “Type”). As a rule,
the back buttons are made customizable and assigned to certain functions at the discretion of the player or depending on the requirements of a particular game. They are designed to allow you to control the game without having to take your fingers away from the main buttons or sticks. The extra buttons on the rear panel are especially useful in first-person shooters and fighting games, where responsiveness and precise control are critical to success in the game.
Headphone output
The presence
of a headphone output in the design of the manipulator.
The purpose of this connector is obvious from the name: it allows you to connect wired headphones or a headset directly to the controller. This is especially convenient in light of the fact that the controller is in the hands of the user, while the gaming device itself (PC, console) can be located at a very significant distance. Also note that this function is very popular in wireless models (see “Connection”), which makes it even more convenient when working with headphones / headsets.
Braided cable
The presence of a braid on the complete cable of the controller.
This feature slightly increases the cost of the wire, but it has a positive effect on its strength and durability: the braid protects the insulation and “hardware” from abrasion, prevents strong bending, and is even able to resist punctures, cuts and curious pets who want to taste the cable to a certain extent.
