Metal backplate
The presence
of a metal backplate in the design of the motherboard.
The backplate is a special plate located on the back side of the board (that is, on the opposite side from the connection slots). This feature is typical mainly for advanced "motherboards" designed for powerful systems: individual components of such systems (especially cooling) can be very heavy, and installing them directly on the board would be fraught with damage to it. And the metal backplate avoids this: it plays the role of an additional support that removes the main load from the motherboard. At the same time, such a plate is usually made thick and elastic enough to transfer even a very significant weight of components without consequences.
Max. clock frequency
The maximum RAM clock speed supported by the motherboard. The actual clock frequency of the installed RAM modules should not exceed this indicator — otherwise, malfunctions are possible, and the capabilities of the “RAM” cannot be used to the fullest.
For modern PCs, a RAM frequency of
1500 – 2000 MHz or
less is considered very low,
2000 – 2500 MHz is modest,
2500 – 3000 MHz is average,
3000 – 3500 MHz is above average, and the most advanced boards can support frequencies of
3500 – 4000 MHz and even
more than 4000 MHz.
SAS connector
The number of SAS ports on the motherboard.
SAS is a modification of the SCSI interface and is usually used to connect drives. Devices with this interface are mainly used in server systems and are practically not found in ordinary desktop PCs. The data transfer rate reaches 6 Gbps (750 Mb/s). It is worth noting that SATA2 and SATA3 drives (see the relevant glossary entries) can be connected to the SAS interface; at the same time, a SAS device cannot be connected to the SATA interface.
PCI Modes
Operating modes of PCI-E 16x slots supported by the motherboard.
For more information about this interface, see above, and information about the modes is indicated if there are several PCI-E 16x slots on the board. This data specifies at what speed these slots can operate when expansion cards are connected to them at the same time, how many lines each of them can use. The fact is that the total number of PCI-Express lanes on any motherboard is limited, and they are usually not enough for the simultaneous operation of all 16-channel slots at full capacity. Accordingly, when working simultaneously, the speed inevitably has to be limited: for example, recording 16x / 4x / 4x means that the motherboard has three 16-channel slots, but if three video cards are connected to them at once, then the second and third slots will be able to give speed only to PCI-E 4x level. Accordingly, for a different number of slots and the number of digits will be appropriate. There are also boards with several modes — for example, 16x/0x/4 and 8x/8x/4x (0x means that the slot becomes inoperable altogether).
You have to pay attention to this parameter mainly when installing several video cards at the same time: in some cases (for example, when using SLI technology), for correct operation of video adapters, they must be connected to slots at the same speed.
USB 2.0
The number of USB 2.0 connectors provided on the motherboard.
USB connectors (all versions) are used to connect to the "motherboard" USB ports located on the front panel of the case. With a special cable, such a port is connected to the connector, while one connector, usually, works with only one port. In other words, the number of connectors on the motherboard corresponds to the maximum number of front USB connectors that can be used with it.
Specifically, USB 2.0 is the oldest version widely used nowadays. It provides data transfer rates up to 480 Mbps, is considered obsolete and is gradually being replaced by more advanced standards, primarily USB 3.2 gen1 (formerly USB 3.0). Nevertheless, a lot of peripherals are still being produced under the USB 2.0 connector: the capabilities of this interface are quite enough for most devices that do not require a high connection speed.
USB C 3.2 gen2x2
The number of
USB-C 3.2 gen2x2 ports provided on the motherboard.
USB-C is a universal connector. It is slightly larger than microUSB, has a convenient double-sided design (it doesn’t matter which side you connect the plug), and also allows you to implement increased power supply and a number of special functions. In addition, the same connector is standardly used in the Thunderbolt v3 interface, and technically it can be used for other interfaces.
As for the specific version of USB-C 3.2 gen2x2, it allows you to achieve a connection speed of 20 Gbps — that is, twice as fast as USB-C 3.2 gen2, hence the name. It is also worth noting that the connection according to the 3.2 gen2x2 standard is implemented only through USB-C connectors and is not used in ports of earlier standards.
Amplifier
Built-in audio signal amplifier in motherboards with an integrated sound card. Provides higher sound quality through headphones.
LAN ports
The number of LAN ports provided in the design of the motherboard.
For more information about the connectors themselves, see "LAN (RJ-45)". Here we note that for everyday wired access to the Internet or a local network, one LAN is enough. However, there are motherboards equipped with
two or more of these ports. Basically, these are high-end solutions — gaming, overclocking, HEDT and server (see "In the direction"); in some models, the number of connectors of this type reaches 5. Such equipment significantly expands the network capabilities of the computer. For example, it allows you to connect your PC to several Internet providers at once; use separate connectors for the Internet and for the local network, separating traffic and increasing the speed of work; use a computer as a router or even a firewall at the entrance to the local network, passing through it all incoming and outgoing traffic and controlling it; etc.
LAN controller
Model of the LAN controller installed in the motherboard.
The LAN controller provides data exchange between the card and the network port(s) of the computer. Accordingly, both general characteristics and individual features of the network functionality of the "motherboard" depend on the characteristics of this module: support for special technologies, connection quality in case of unstable communication, etc. Knowing the model of the LAN controller, you can find detailed data on it — including including practical reviews; this information is rarely needed by the average user, but it can be useful for online game enthusiasts and for some specific tasks.
Thus, the LAN controller model is specified mainly in cases where it is a rather advanced solution that is noticeably superior to standard models. Such solutions are currently produced mainly under the brands
Intel(middle level),
Realtek(relatively simple models),
Aquntia and
Killer(mostly advanced solutions).
