United Kingdom
Catalog   /   Home & Renovation   /   Autonomous Power Supply   /   Solar Panels

Comparison BLUETTI MP200 200 W vs BLUETTI SP220S 220 W

Add to comparison
BLUETTI MP200 200 W
BLUETTI SP220S 220 W
BLUETTI MP200 200 WBLUETTI SP220S 220 W
Outdated Product
from £269.00 
Outdated Product
TOP sellers
Featuresportableportable
Typemonocrystallinemonocrystalline
Specs (STC)
Power (Pmax)200 W220 W
Nominal voltage (Vmp)22.9 В
Nominal power (Imp)11 А11.4 А
Efficiency24 %
Features
MC4 connector
Folding design
Support foot
Suspension system
WaterproofIP67
Operating temperature-10 °C ~ +65 °C-10 °C ~ +65 °C
General
Dimensions2075x681x35 mm2259x536x23 mm
Folded size681x553x65 mm601x536x47 mm
Weight8.7 kg7.3 kg
Added to E-Catalogjuly 2024january 2023
Glossary

Specs (STC)

Standard Test Conditions (STC) are standard test conditions that reflect the operation of a solar panel under ideal conditions. As part of the tests, the weather of a clear sunny day with an air temperature of +25 °C, no wind, solar intensity of 1000 W/m² and an emission spectrum relative to air mass of 1.5 is simulated. The surface of the solar cell must be placed strictly perpendicular to the rays from the celestial body. Note that in real operation of the solar panel, such conditions are extremely rare. However, in general, the characteristics of the STC allow us to evaluate the "passport" parameters of the energy storage device.

Power (Pmax)

The amount of electricity in watts that a solar panel produces in one hour in tests using the STC method. The panel must provide the declared number of watts during normal operation.

Nominal voltage (Vmp)

The voltage reading on the voltmeter during a solar panel test at the nominal power level according to the STC method. This parameter, Vmp, stands for Voltage at Maximum Power and is measured in volts. It helps determine which type of batteries the panel is designed for — either 12 V or 24V.

Nominal power (Imp)

Ammeter reading during solar panel testing under STC conditions. The value of the rated current Imp (Current at Maximum Power) is measured in amperes.

Efficiency

Percentage of the maximum solar panel power to the incident radiation power produced. The efficiency parameter allows you to determine how efficiently the panel PV module converts solar energy into direct electric current.

Waterproof

The level of protection is indicated by two digits according to the IP standard. The first digit indicates the protection against dust (maximum 6), the second indicates the degree of protection against water (maximum 8). The maximum degree of protection according to this standard is IP68, that is, complete tightness. There are also markings of the IPX4 type, where the first digit is not spelled out - this means that the solar panel has not been officially certified for dust resistance.

Dimensions

Dimensions of the solar panel in unfolded form.

Folded size

Dimensions of the solar panel when folded. First of all, the convenience of transportation depends on them. Knowing the dimensions, you can roughly estimate the amount of space needed to carry the solar panel in a backpack or when transporting it in the trunk of a car.
BLUETTI MP200 often compared
BLUETTI SP220S often compared