Jet depth
Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.
Jet height
The jet height is usually specified for taps with horizontal installation (see "Type of installation"). It is measured from the base of the tap to the spout outlet. The large height of the spout is important primarily for kitchen models (see "Suitable for"), because it allows you to place large dishes in the sink. This parameter is directly related to the height of the spout (see above): the height of the jet cannot be greater than the height of the spout. Thus, in fact, one has to find a compromise between the height of the jet and the dimensions of the tap, especially if there is little space for its installation.
Installation
Installation type for which the tap is designed. Nowadays,
wall and
sink taps (classic,
freestanding and
under the window), as well as built-in solutions, are most widely used — usually with installation
in the wall, less often
horizontally. Models built into the wall can be equipped with a
bar(it plays the role of a kind of body and combines all the elements of the tap) or can be supplied
without a bar(this option often allows you to choose the distance between the separate parts of the set). A special, rather rare and specific variety are
floor taps.
Here is a more detailed description of each option:
— Wall (vertical). Models designed to mount to a vertical surface, typically a wall. This installation method is found mainly in bath and/or shower models, but can also be used in other types of taps— in particular, kitchen ones.
— Sink (horizontal). Installation on a horizontal surface such as a washbasin or kitchen sink. This method is extremely popular in models for kitchens and washbasins, it is also used in traditional bidet taps, but in other varieties, for a number of reasons, it has not gained much popularity.
— Sink (under the windo
...w). A special kind of taps, which, due to their design, can be installed under the window, without preventing it from opening and closing. This is achieved in two ways. The first is the ability to tilt the spout towards the washbasin or sink, thereby hiding the tap in the sink bowl. The second method is based on a special mount of the tap body to its base, which makes it easy to pull it out of the “base” and put it next to it.
— Built in (wall). Mounting method in which most of the structure is hidden behind a wall or other vertical surface. Outside, there are only elements for which it is essential: spout, valves, shower set, etc. Recessed installation provides a neat appearance and saves space. In addition, many models of such taps allow you to choose the distance between individual external elements and their relative position. However, embedding is noticeably more difficult than usual installation, and repair/maintenance of such a tap can be quite difficult. This option is used in models for baths, showers, washbasins, as well as some types of bidet taps (see "Suitable for").
— Built in (horizontal). Another type of built-in taps, designed, in accordance with the name, for installation on a horizontal surface. They have the same main advantages and disadvantages as the in-wall taps described above, but differ in specialization: this type of installation is most popular in “washbasin only” models, it is somewhat less common in bath and shower taps.
— Floor. Installation on the floor using a special stand, thanks to which the main part of the tap is placed at the desired height. Such models are expensive, and the installation itself is quite complicated, it requires a spacious room with a specific organization of plumbing. Therefore, this option has not received much distribution: it is used mainly in designer taps made for freestanding bathtubs or washbasins.Tap height
The height of the tap, measured from its base or lowest point to the highest point of the spout. The height of the spout partly determines the installation possibilities — in fact, this is the minimum vertical free space that is required for the tap. In addition, in models with horizontal installation (see "Type of installation"), the spout height is related to the jet height (see below).
Depth
The distance from the extreme front to the extreme back of the tap determines the installation possibilities of the device. In comparison with the depth of the jet, it gives much more visual data precisely on the dimensions of the entire tap, especially for models where there is either no spout (built-in models) or the spout is not the longest part of the set (vertical taps).
