Comparison Fantom FP-328M vs Cyclone MP-1063

Features of the design of the front panel installed in the radio. One device can combine several features at once - for example, the removable panel may well be folding.

— Removable panel. Possibility to remove the front panel of the car radio and take it with you when leaving the car. The meaning of this function is to protect against theft: firstly, the front panel is the most accessible and attractive part of the radio for thieves; secondly, this reduces the likelihood of the theft of the radio itself, because a device without a control panel is of rather little value.

— Retractable screen. A retractable screen is usually the preserve of premium radios. When folded, such a screen is hidden in the mounting socket of the radio in a horizontal position, and when working, it moves out and becomes vertical. Thus, with the relatively small dimensions of the radio itself (see Mounting size), it can be equipped with a fairly large screen, allowing you to even watch videos comfortably.

— Motorized. This feature means that the display of the radio is equipped with a motor drive, due to which you can change the angle of the screen. This function is especially important in light of the fact that in relatively inexpensive types of matrices the image is normally visible only from a certain angle. However, the ability to adjust the tilt of the screen may be usef...ul in any case.

- Tesla Style. The front panel is made in the style of the on-board computer of Tesla cars. The main feature of this design is a huge touch screen by the standards of a car radio (about 12"), from which you can control not only the radio, but also various functions of the car itself - for example, climate control. Accordingly, such radios have extensive capabilities. They They are usually standard (see “Original radio for”), and are produced not only for Tesla, but also for other car brands.

The number of fixed settings (presets) provided in the car radio equalizer.

The presence of such settings can greatly simplify the adjustment: choosing the right preset is easier than manually adjusting each EQ band. At the same time, presets are often selected by the manufacturer for certain genres of music and have the appropriate names — "Rock", "Pop", "Jazz", etc.; this simplifies the task even more. And the more fixed settings in the device, the wider the choice of the user. In some radio tape recorders, in addition to pre-flashed ones, user presets are also provided — they can be programmed in advance and turned on in the same way as the preset ones.

The ability to adjust the high cut without affecting other frequency ranges. Thanks to this, you can improve the overall timbre of the sound by completely removing the high frequencies, if necessary (for example, for a subwoofer). Moreover, this method of adjustment is much simpler than adjusting individual equalizer bands (see above). Typically, this function is combined with bass control (see below).

The ability to adjust the low cut without affecting other frequency ranges. Thanks to this, you can completely remove low frequencies (for example, for salon acoustics, when the subwoofer is “responsible” for the bass), without affecting other frequencies. This way of adjusting is much easier than adjusting individual EQ bands (see above).

The rated sound power produced by the radio amplifier for each audio channel.

Nominal is the highest average (rms) sound power at which the amplifier operates without overload and is able to operate for an unlimited time. This is the main indicator characterizing the overall sound volume of the radio; individual power surges can be much higher than the nominal value, but they are short-lived; here we are talking about a constant signal level. In addition, compatibility with specific speakers depends on this indicator: the rated power of the speaker system must be no lower than that of the amplifier, otherwise the speakers may be damaged at high volumes. However, the spread is not so great; there are radios with an output power of 40 W, 45 W, 50 W, 55 W, 60 W and more.

Optimal amplifier power settings depend on a number of factors, ranging from the number of channels to the personal preferences of listeners. Detailed information on this topic can be found in special sources; In short, we can say that the higher the power per channel, the louder the sound the radio can produce.

— Remote control. The radio has a remote control. This function will be convenient primarily for passengers behind the driver — from the rear seats you can’t reach the radio itself. In addition, remotes often have more keys than the stock control panel, which allows you to access various additional functions on the go without digging through the settings.

— Remote control on the steering wheel. Remote control (see above) with the ability to mount on the steering wheel. Such a remote control allows the driver to control the functions of the radio without removing his hands from the steering wheel and thus not being distracted from driving the machine.

— Control from regular steering wheel buttons. The ability to control the radio from standard buttons, originally provided on the steering wheel for this very purpose. This function is similar to the steering wheel remote control described above, with the adjustment that the "remote" in this case is built directly into the steering wheel. Before buying such a radio, you must definitely check its compatibility with a particular model of car.

— Smartphone control. The presence of software (application) that allows you to control the radio using a smartphone, tablet, etc. This is not just about switching songs on the phone, but a full adjustment of all device functions.
...
— Voice control. The ability to control the radio using voice commands. The implementation of such control can be different: in some models, to activate it, you need to press a button, others constantly “listen” to the environment and immediately respond to code words. Anyway, this function allows the driver to control the radio without taking his eyes off the road, which has a positive effect on traffic safety. Note that in its pure form, voice control in modern radio tape recorders is becoming less and less common, being replaced by advanced technologies like CarPlay and Android Auto (see “Control Functions”), which also include voice functions.

— Apple CarPlay system. Support for car radio technology CarPlay. This technology is designed to connect portable devices from Apple to the radio, primarily the iPhone, although it is technically possible to work with any “apple” gadget that has iOS 7.1 or later firmware, as well as a proprietary 8-pin Lightning connector. Thanks to this technology, many smartphone functions (including the Siri voice assistant, navigation, call and message management, as well as music) are integrated into the radio; using them through on-board electronics can be much more convenient than holding the iPhone in your hands. At the same time, CarPlay puts special emphasis on safety: it is designed with the maximum use of voice control, so that the driver has to be distracted by the radio screen as little as possible. For example, the mentioned messages can be dictated by voice and listened to "performed" by Siri. The connection itself is carried out by wire, through the mentioned Lightning connector.

— Android Auto system. Car radio support for Android Auto technology. Similar to the CarPlay described above, this technology is designed to combine portable devices with on-board electronics of a car — only, as you might guess from the name, in this case we are talking about gadgets running the Android OS. When you connect such a gadget, the radio actually plays the role of an external display for a mobile device, with its optimized interface and related capabilities. Features available through Android Auto include navigation (including mobile device access to external GPS antennas and modules), music control, receiving and making calls, listening to and composing SMS, and searching the Internet. Android Auto is only available for Android 5.0 Lollipop and later; in addition, if the mobile device uses proprietary firmware, its compatibility with the radio needs to be specified separately.

The number of line outputs (see above) provided in the design of the radio. It should be noted that usually these outputs use RCA connectors (“tulip”), and the analog format allows only one audio channel to be transmitted through one such. Therefore, to work with a stereo signal, two RCA connectors are required, and just a pair of such jacks is considered to be one line output - a set designed for one set of stereo speakers. The main difference between this interface and the same RCA used to connect speakers (see above) is that the line output receives a signal from a preamplifier that is unsuitable for feeding to passive acoustics. Such a signal must be sent to active speakers or an external amplifier (whereas the speaker is connected to the output of a power amplifier designed for passive speakers).

— FM. This term refers to the part of the ultra-short wave (VHF) range ranging from 87.5 MHz to 108 MHz. It uses frequency modulation, which allows you to broadcast music in stereo with a fairly high sound quality, as well as transmit RDS signals (see RDS support). At the moment, most music radio stations in the CIS are broadcasting in this range. The disadvantage of FM is the limited reception area — a maximum of several tens of kilometers from the broadcasting station — so they can usually be listened to within the same city and surrounding areas.

— AM (English amplitude modulation — amplitude modulation) — broadcasting using amplitude modulation. It can be carried out in different bands, but most commercial broadcasts are carried out on medium waves in the range of 520-1610 kHz; most consumer AM receivers, including those in car radios, are designed for the same frequencies. AM broadcasting has a much longer reception range than FM (it can be hundreds of kilometers), but the sound quality is lower, so this format is broadcast mainly by “talk” and news radio stations.

— LW (English long wave) — broadcasting on long waves in the range of 148-408 kHz. Such broadcasting has a reception range of hundreds and even thousands of kilometers, and is almost independent of the time of day and atmospheric interference. It is used mainly at stations of national importance.

— MW (English medium wave) — broadcasting on medium waves in the range of 522-1...720 kHz, in fact — the same as AM (see above).

— SW (English short wave) — broadcasting on short waves, is carried out in a whole set of bands, the lower limit of which is at the level of 2.5 MHz, and the highest — 26.1 MHz. The features of the propagation of short waves are such that they can be received on the opposite side of the globe, but it is not always possible to hear within a few tens of kilometers from the transmitter. Therefore, shortwave broadcasting is mainly used for foreign broadcasts.

— VHF. In this case, not the entire VHF band is meant, but the sub-band 65.9-74 MHz, using the so-called OIRT modulation. In this format, VHF broadcasting was originally conducted in the countries of the Soviet Union and Eastern Europe, but at the moment it is not very popular due to the development of FM. VHF OIRT is technically similar to FM (see above); the main differences are the bandwidth occupied and the inability to transmit RDS signals in OIRT (see RDS support).

The presence of a USB port, the only purpose of which is to recharge gadgets. The USB port for charging eliminates the need for wires from the cigarette lighter, and using your smartphone as a navigator and simultaneously recharging it will be much easier.