Aerocool Rev RGB Pro
 | Outdated Product A set of three spectacular 120mm RGB LED case fans with a limited maximum rotation speed (up to 1200 rpm). The kit includes a separate controller-hub Aerocool P7-H1 to control the lighting of coolers and additional LED strips (up to 5 units in total). Positioned as a product of the middle price category, focused on use in modding systems. Due to their decent performance, the fans can provide cooling for a high-performance gaming configuration assembled in a case designed for the use of 120x120x25 mm coolers. Equipped with an optimized 11-blade impeller that effectively directs air flows, increasing its pressure and providing maximum air exchange with a minimum noise level (15 dB). The fans of the Aerocool Rev RGB Pro kit are equipped with special silicone vibration-absorbing pads that prev...ent the transmission of vibration to the structural elements of the case. However, it is worth noting that for the most complete damping of vibrations and noise, the fans should be fastened not with metal bolts, but with damping silicone clamps. For easy cleaning of accumulated dust, the impeller is removable. The fans are equipped with hydrodynamic bearings and are driven by a 3-pin connector. To control the backlight, there is a separate 4-pin connector attached to the hub. |
 |
Aerocool Rev RGB Pro | |||||||||||||||||||||||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||
A set of three spectacular 120mm RGB LED case fans with a limited maximum rotation speed (up to 1200 rpm). The kit includes a separate controller-hub Aerocool P7-H1 to control the lighting of coolers and additional LED strips (up to 5 units in total). Positioned as a product of the middle price category, focused on use in modding systems. Due to their decent performance, the fans can provide cooling for a high-performance gaming configuration assembled in a case designed for the use of 120x120x25 mm coolers.
Equipped with an optimized 11-blade impeller that effectively directs air flows, increasing its pressure and providing maximum air exchange with a minimum noise level (15 dB). The fans of the Aerocool Rev RGB Pro kit are equipped with special silicone vibration-absorbing pads that prevent the transmission of vibration to the structural elements of the case. However, it is worth noting that for the most complete damping of vibrations and noise, the fans should be fastened not with metal bolts, but with damping silicone clamps. For easy cleaning of accumulated dust, the impeller is removable. The fans are equipped with hydrodynamic bearings and are driven by a 3-pin connector. To control the backlight, there is a separate 4-pin connector attached to the hub.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Aerocool 2025 - new arrivals, bestsellers, and the most relevant models Aerocool.
Great fans for advanced builds. A hub with the ability to connect up to 5 turntables, RGB strips and other hubs. The blades are removable for easy maintenance. In the software, you can set one of 16 million colors and choose one of 3 modes, or make the turntables shimmer in different colors. Silence, air flow Didn't understand the software  Semen Krymskiy: use Aerocool Rev RGB Pro few months |
Purchasing this set, you will be able to connect 5+ fans, power the lighting of these fans, as well as other illuminated elements. They are pretty quiet, visually pleasing, and there are no issues during installation, except for the fact that screwing in the self-tapping screws for the first time can be slightly difficult. Otherwise, there is an instruction manual where everything is clearly explained on how and where to connect. Quiet fans Easy installation Ability to connect 5+ fans No motherboard with RGB or A-RGB support required, connects via USB 2.0 The first time they twist tightly. C7AY PROD: use Aerocool Rev RGB Pro less than month |
The kit comes with a hub, with three turntables, everything looks beautiful, you don’t even need an RGB connector on the motherboard for it all to work, because the hub has its own backlight controller. Price, design. ease of installation The hub itself with Velcro can be attached to anything, through the branded software p7-s1 I control the lighting and modes, it's beautiful overall. Andrey Falkon: use Aerocool Rev RGB Pro less than month |